Hallo
nachdem ich das Handbuch genau befolgt habe ergibt sich nun folgendes PRoblem.
Der Rootserver ist im WI erreichbar.
Aber
der ftp zugang geht nicht mehr und auch die Plesk oberfläche ist nicht erreichbar.
den FTp Server neu starten bring auch nicht den da kommt der fehler das die datei nicht vorhanden ist.
Aktuell führen wir noch einige Anpassungen durch, das Forum wurde jedoch bereits live geschaltet.
-
-
einfach diesem tut hier folgen :
http://teklab.de/support/topic…eichbar-plesk/#entry26221
Per Root mit dem FTP Programm oder [lexicon='WinSCP'][/lexicon] einloggen und die dateien austauschen -
Hallo
Danke für den Tipp
leider hat es nicht zum erfolg geführt. Weder FTP noch Plesk laufen -
man muss schauen welche ftp configs man nimmt Debian/ubuntu etc haben unterscheidliche ftp configs
-
Hi ich nutze Debian
welche datein muss ich nehmen. -
uff hier im Forum kreisen ettliche configs herum... zu welchem System diese sind steht meist leider nicht mit dabei
-
Fakt ist warum zerschiesst es mir den ftp wenn ich die Tekbase drauf mache??!!?!?!
-
weil der tekbase root installer nicht für einen plesk Server gedacht ist
-
Ok.... verstanden.
aber wie verwalte ich meinen Server ohne Plesk. Gibts da eine alternative -
Zitat von rkdackel123
Ok.... verstanden.
aber wie verwalte ich meinen Server ohne Plesk. Gibts da eine alternative
Naja über die Console ?
Gernell warum holst du dir nicht einen kleinen Vserver wo plesk oben ist und dann einen großen wo deine Gameserver oben sind ?
Mache ich auch so und funktioniert super. -
Hi
weil ich keine Gameserver möchte.
Mein Interesse gilt eher den Southcast servern.
Ich will aber eine Oberfläche wo ich alles bequem steuern kann. -
Also gibt es eine Korrekte Antwort. Habe nämlich das gleiche Problem.
Und jetzt bitte nicht warum machst du nicht noch ein Server und noch ein.
Ist Tekbase nun eine Vernünftig funktionierede Bedienungshilfe,
oder muss man sich einfach alles aus ein Forum zusammen suchen und dann mal schauen ob es läuft.
Wenn ich mir ein Auto kaufe, muss ich zwar tanken, aber dann kann ich bequem von a nach b fahren.
Hier scheint es als wenn ich mir erst noch die Räder anschrauben muss und selber den Motor einbauen muss.
Der oben genannte Link wird auch nicht mehr von diesem Forum gefunden -
Unter /etc/ die proftpd.conf wieder einspielen von Plesk.
Code
Alles anzeigen# # To have more informations about Proftpd configuration # look at : http://www.proftpd.org/ # # This is a basic ProFTPD configuration file (rename it to # 'proftpd.conf' for actual use. It establishes a single server # and a single anonymous login. It assumes that you have a user/group # "nobody" and "ftp" for normal operation and anon. ServerName "ProFTPD" #ServerType standalone ServerType inetd DefaultServer on <Global> DefaultRoot ~ psacln AllowOverwrite on <IfModule mod_tls.c> # common settings for all virtual hosts TLSEngine on TLSRequired off TLSLog /var/log/plesk/ftp_tls.log TLSRSACertificateFile /opt/psa/admin/conf/httpsd.pem TLSRSACertificateKeyFile /opt/psa/admin/conf/httpsd.pem # Authenticate clients that want to use FTP over TLS? TLSVerifyClient off # Allow SSL/TLS renegotiations when the client requests them, but # do not force the renegotations. Some clients do not support # SSL/TLS renegotiations; when mod_tls forces a renegotiation, these # clients will close the data connection, or there will be a timeout # on an idle data connection. TLSRenegotiate none # As of ProFTPD 1.3.3rc1, mod_tls only accepts SSL/TLS data connections # that reuse the SSL session of the control connection, as a security measure. # Unfortunately, there are some clients (e.g. curl) which do not reuse SSL sessions. TLSOptions NoSessionReuseRequired </IfModule> </Global> DefaultTransferMode binary UseFtpUsers on TimesGMT off SetEnv TZ :/etc/localtime # Port 21 is the standard FTP port. Port 21 # Umask 022 is a good standard umask to prevent new dirs and files # from being group and world writable. Umask 022 # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 #Following part of this config file were generate by PSA automatically #Any changes in this part will be overwritten by next manipulation #with Anonymous FTP feature in PSA control panel. #Include directive should point to place where FTP Virtual Hosts configurations #preserved ScoreboardFile /var/run/proftpd_scoreboard # Primary log file mest be outside of system logrotate province TransferLog /var/log/plesk/xferlog #Change default group for new files and directories in vhosts dir to psacln <Directory /var/www/vhosts> GroupOwner psacln </Directory> # Enable PAM authentication AuthPAM on AuthPAMConfig proftpd IdentLookups off UseReverseDNS off AuthGroupFile /etc/group Include /etc/proftpd.d/*.conf
-
Also erstmal vielen Dank für die Schnelle Antwort
mit der Conf datei von oben habe ich wieder Zugriff per SFTP mit Filezilla.
Leider kein normales FTP mehr. (macht nix sind bloß gefühlte 200Dateien die ich auf dem Laufenden Server umschreiben muss)
Dann habe ich aber dennoch ein Problem mit Tekbase
Denn selbst wenn ich da alle FTP - Zugangsdaten neu eintrage
habe ich keine Möglichkeit den FTP-Browser zu benutzen
Habe Port 21 und Port 22 probiert
was mach ich falsch? -
Also hast du auch auf dem Webserver die Rootserver Skripte installiert (oder die Webserver Skripte) wo sich auch Plesk drauf befindet? Beschreibe mal dein vorgehen und nutzung.
-
Also Ich habe erst die Webserver Scripte installiert
dann funktionierte auch der FTP-Browser
Dann habe ich die RootServer Scripte installiert
damit ich ein RootServer einrichten kann, damit ich ein Streamserver einrichten kann.
Also Rootserver Scripte installiert
mich durch das Menu geklickt.
(Okay beim ersten mal falsch geklickt -> RedHat)
beim 2ten mal dann aber richtig geklickt auf -> Centos
dann war auch fast alles Grün "Ok" nur sqlite nicht (sqlite3 läuft aber)
Dann halt SSH User OK
Beim Stoppen von Munin kam ein Fehler
beim Starten aber OK
FTP Server einrichtung lief auch super durch
Klar habe ich Plesk auf dem Server aber die RootScripte kann man doch nur über Root zugriff installieren. Oder ? -
Also im Grunde wenn Plesk installiert ist benötigt man die Webserver Skripte nicht (SSH2, ionCube Update usw. macht man einfach per Hand.) ansonsten überschreiben sich auch Configen, sollte man jedoch auf den gleichen Server auch k.a Streamserver etc. installieren und über TekBASE Steuern dann braucht man nur die Rootserver Skripte, hier muss man nur vorher die Proftpd.conf sichern und danach wieder einspielen.
-
Okay und was kann ich nun noch machen ?
Gibt es sowas wie eine "Uninstall der Webscripte" oder auch Root-Scripte
ich kann ja jetzt nicht den ganzen Server neu aufsetzen um von vorne anzufangen? -
du benötigst die originale plesk proftpd.conf
Moment eben
Code
Alles anzeigen# # To have more informations about Proftpd configuration # look at : http://www.proftpd.org/ # # This is a basic ProFTPD configuration file (rename it to # 'proftpd.conf' for actual use. It establishes a single server # and a single anonymous login. It assumes that you have a user/group # "nobody" and "ftp" for normal operation and anon. ServerName "netsigna HostSystem #001" #ServerType standalone ServerType inetd DefaultServer on <Global> DefaultRoot ~ psacln AllowOverwrite on ServerIdent off <IfModule mod_tls.c> # common settings for all virtual hosts TLSEngine on TLSRequired off TLSLog /var/log/plesk/ftp_tls.log TLSRSACertificateFile /opt/psa/admin/conf/httpsd.pem TLSRSACertificateKeyFile /opt/psa/admin/conf/httpsd.pem # Authenticate clients that want to use FTP over TLS? TLSVerifyClient off # Allow SSL/TLS renegotiations when the client requests them, but # do not force the renegotations. Some clients do not support # SSL/TLS renegotiations; when mod_tls forces a renegotiation, these # clients will close the data connection, or there will be a timeout # on an idle data connection. TLSRenegotiate none # As of ProFTPD 1.3.3rc1, mod_tls only accepts SSL/TLS data connections # that reuse the SSL session of the control connection, as a security measure. # Unfortunately, there are some clients (e.g. curl) which do not reuse SSL sessions. TLSOptions NoSessionReuseRequired </IfModule> </Global> DefaultTransferMode binary UseFtpUsers on TimesGMT off SetEnv TZ :/etc/localtime # Port 21 is the standard FTP port. Port 21 # Umask 022 is a good standard umask to prevent new dirs and files # from being group and world writable. Umask 022 # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 #Following part of this config file were generate by PSA automatically #Any changes in this part will be overwritten by next manipulation #with Anonymous FTP feature in PSA control panel. #Include directive should point to place where FTP Virtual Hosts configurations #preserved ScoreboardFile /var/run/proftpd_scoreboard # Primary log file mest be outside of system logrotate province TransferLog /var/log/plesk/xferlog #Change default group for new files and directories in vhosts dir to psacln <Directory /var/www/vhosts> GroupOwner psacln </Directory> # Enable PAM authentication AuthPAM on AuthPAMConfig proftpd IdentLookups off UseReverseDNS off AuthGroupFile /etc/group Include /etc/proftpd.d/*.conf
das ist die originale von plesk. -