Hallo Leute!
Ich habe ein weiteres Problem gefunden!
Wenn ich die öffentliche IP-Adresse bei dem jeweiligen Rootserver eintrage und danach auf den Kunden gehe und auf WebFTP klicke kann er die Seite nicht öffnen! (Ich habe nicht den Standard Port 21 verwendet, da ich mehrere Gameserver in einem Netzwerk stehen habe! Wenn ich aber eine interne IP reinschreibe kann er mir die Daten anzeigen!) Ich habe auch auf dem Rootserver Passiv Mode aktivieren / deaktivieren versucht hat aber nix gebracht! Warum ist das so und was kann ich machen? (Wenn ich aber hingegen den Standard Port verwende geht es!)
Ich hoffe, mir kann einer von euch helfen! Ist sehr wichtig!
Vielen vielen Dank schon mal im Voraus
WebFTP nur Port 21?
- menserv-host.com
- Geschlossen
- Erledigt
Aktuell führen wir noch einige Anpassungen durch, das Forum wurde jedoch bereits live geschaltet.
-
-
Kann man den nicht einstellen unter server -> server ip, also da wo man die root server hinzufügt?
-
was meinst du damit?
-
Guck mal unter Root Server, und dann unten bei FTP-Port
-
hab ich auch dort habe ich ja den "neuen" FTP Port eingetragen!
-
Dann sollte der webftp mit dem port verbinden...
-
ich habe ja unter Server Module -> Rootserver -> Testserver 01 -> Server-IP* 84.155.xxx.xxx ; FTP-Server Port 20100 und FTP-Server Typ: Passiv Mode an
Hab ich ja alles eingestellt und wenn ich bei Server-IP*: eine interne IP eintrage GEHT es !
Aber wenn ich eine öffentliche IP eintrage geht es NICHT !!! -> Nur wenn der Port 21 eingetragen ist !!!!!
Und warum geht es bei der internen IP und bei der öffentlichen IP NICHT ????? -
dann hört dein FTP server nicht auf den Port einfach mal die proftpd.conf checken
-
doch der hört ja auf den Port, weil es ja sonst nicht mit FileZilla gingen würde !!
Das ist ein Programmier Fehler!! -
Irgendwo wirst du nen fehler in deiner proftpd.conf haben kannst se ja mal posten...
Und was meinst mit interner ip? 10.0.1.X ?
-
ja mit interner z.B. 192.168.xxx.xxx
-
#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes, reload proftpd after modifications, if
# it runs in daemon mode. It is not required in inetd/xinetd mode.
#
# Includes DSO modules
Include /etc/proftpd/modules.conf
# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on
# If set on you can experience a longer connection delay in many cases.
ServerName "Debian"
ServerType standalone
DeferWelcome off
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"
DenyFilter \*.*/
# Use this to jail all users in their homes
# DefaultRoot ~
# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off
# Port 21 is the standard FTP port.
Port 20100
# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
PassivePorts 20100 20150
# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4
# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Set the user and group that the server normally runs at.
User proftpd
Group nogroup
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off
# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c
# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off
TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log
# Logging onto /var/log/lastlog is enabled but set to off by default
#UseLastlog on
# In order to keep log file dates consistent after chroot, use timezone info
# from /etc/localtime. If this is not set, and proftpd is configured to
# chroot (e.g. DefaultRoot or http://www.securityfocus.com/bid/11430/discuss
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>
<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>
<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>
#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf
#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf
#
# Useful to keep VirtualHost/VirtualRoot directives separated
#
#Include /etc/proftpd/virtuals.conf
# A basic anonymous configuration, no upload directories.
# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>
# Include other custom configuration files
Include /etc/proftpd/conf.d/
AllowOverwrite on
UseReverseDNS off
IdentLookups off
DefaultRoot ~ -
-
YEEAAHHH!!!!! thx ess gehhhttt
-
Falscher Forenbereich ich verschiebe es.
-
Bitte bitte
Configs sind schon eine scheisse
Ich ärgere mich auch seit 13/14 jahren immer wieder mit rum
-
das kann ich glauben eine kleine Einstellung große Wirkung