Sehr geehrte Community, sehr geehrtes Tekbase-Team,
bei mir funktionieren FTP Browser sowie die FTP Benutzerdaten leider nicht. Welche Ursache kann dies haben?
Anbei ein Screenshot.
Sehr geehrte Community, sehr geehrtes Tekbase-Team,
bei mir funktionieren FTP Browser sowie die FTP Benutzerdaten leider nicht. Welche Ursache kann dies haben?
Anbei ein Screenshot.
Hallo Nicolas,
ist auf dem Server wo der Gameserver installiet wurde der FTP-Online und der Port auf 21?
Hallo,
wo kann ich das einsehen ob der FTP Online ist?
Falls du meinst, Einstellungen --> FTP!
Welche Daten muss ich dort eintragen? - Dort steht bei mir nichts drin
Beste Grüße
Nicolas Stoffregen
Diese Einstellungen unter Adminbereich Einstellungen gehören nicht im Server wo der Gameserver liegt.
Dazu in [lexicon='Putty'][/lexicon]/SSH einloggen und mit /etc/init.d/proftpd status (sofern Debian und Proftpd genutzt) eingeben. Sollte der Status auf Offline sein dann /etc/init.d/proftpd start
Hallo,
ist Online, siehe Screen.
Beste Grüße
Nicolas Stoffregen
Kannst du mit ein FTP Programm dich mit den Logindaten die im WebFTP stehen verbinden?
Poste mal bitte deine proftpd.conf oder schau ob mysql für die Userverwaltung in der proftpd verwendet wird. Falls ja siehe WIKI FTP geht nicht.
Hallo,
Zugriff verweigert.
Kann es an Froxlor liegen?
Beste Grüße
Nicolas Stoffregen
## /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.# To really apply changes reload proftpd after modifications.#
# Includes DSO modulesInclude /etc/proftpd/modules.conf
# Set off to disable IPv6 support which is annoying on IPv4 only boxes.UseIPv6 on
ServerName "zensiert FTP Server"ServerType standaloneDeferWelcome off
MultilineRFC2228 onDefaultServer onShowSymlinks on
TimeoutNoTransfer 600TimeoutStalled 600TimeoutIdle 1200
DisplayLogin welcome.msgDisplayChdir .message trueListOptions "-l"
DenyFilter \*.*/
# Use this to jail all users in their homes # DefaultRoot ~
# Users require a valid shell listed in /etc/shells to login.# Use this directive to release that constrain.# RequireValidShell off
# Port 21 is the standard FTP port.Port 21
# In some cases you have to specify passive ports range to by-pass# firewall limitations. Ephemeral ports can be used for that, but# feel free to use a more narrow range.# PassivePorts 49152 65534
# If your host was NATted, this option is useful in order to# allow passive tranfers to work. You have to use your public# address and opening the passive ports used on your firewall as well.# MasqueradeAddress 1.2.3.4
# This is useful for masquerading address with dynamic IPs:# refresh any configured MasqueradeAddress directives every 8 hours<IfModule mod_dynmasq.c># DynMasqRefresh 28800</IfModule>
# To prevent DoS attacks, set the maximum number of child processes# to 30. If you need to allow more than 30 concurrent connections# at once, simply increase this value. Note that this ONLY works# in standalone mode, in inetd mode you should use an inetd server# that allows you to limit maximum number of processes per service# (such as xinetd)MaxInstances 30
# Set the user and group that the server normally runs at.User proftpdGroup nogroup
# Umask 022 is a good standard umask to prevent new files and dirs# (second parm) from being group and world writable.Umask 022 022# Normally, we want files to be overwriteable.
# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:# PersistentPasswd off
# This is required to use both PAM-based authentication and local passwords# AuthOrder mod_auth_pam.c* mod_auth_unix.c
# Be warned: use of this directive impacts CPU average load!# Uncomment this if you like to see progress and transfer rate with ftpwho# in downloads. That is not needed for uploads rates.## UseSendFile off
TransferLog /var/log/proftpd/xferlogSystemLog /var/log/proftpd/proftpd.log
# Allow up- and downloads to be continuedAllowRetrieveRestart OnAllowStoreRestart On
<IfModule mod_quotatab.c>QuotaEngine on</IfModule>
<IfModule mod_ratio.c>Ratios off</IfModule>
# Delay engine reduces impact of the so-called Timing Attack described in# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02# It is on by default. <IfModule mod_delay.c>DelayEngine off</IfModule>
<IfModule mod_ctrls.c>ControlsEngine offControlsMaxClients 2ControlsLog /var/log/proftpd/controls.logControlsInterval 5ControlsSocket /var/run/proftpd/proftpd.sock</IfModule>
<IfModule mod_ctrls_admin.c>AdminControlsEngine off</IfModule>
## Alternative authentication frameworks##Include /etc/proftpd/ldap.confInclude /etc/proftpd/sql.conf
## This is used for FTPS connections##Include /etc/proftpd/tls.conf
AllowOverwrite onUseReverseDNS offIdentLookups offDefaultRoot ~
Alles anzeigen
UseFTPUsers = on fehlt glaube ich noch. Das sollte eigentlich das tekbase_inst.tar Skript automatisch eintragen.
Hallo,
ich habe den Parameter eingefügt und proftpd neugestartet. Leider startet Proftpd nun nichtmehr! Auf Zeile 136 befindet sich dein genannter Parameter. Siehe Screen.
Habe es wieder rausgenommen und gestartet, da hat es wieder funktioniert.
Wie kriege ich mein Problem nun gelöst?
Hallo,
probier mal "UseFtpUsers on" glaube in der Config wird immer nur der erste Buchstabe vom Wort großgeschrieben.
Hallo,
probier mal "UseFtpUsers on" glaube in der Config wird immer nur der erste Buchstabe vom Wort großgeschrieben.
Schau dir mal das Bild an
Der Befehl UseFtpUsers on ist für etc/ftpusers/
-----------
Im Anhang eine Config die bei uns auch läuft. HideFiles und PathDenyFilter habe ich mal entfernt.
joa hätte man sich mal vorher das Bild angeschaut
Hallo,
einwandfrei! Vielen Dank für die Hilfe.
Beste Grüße
Nicolas Stoffregen