Moin,
Ich hab das Problem das wohl keine Sub-FTP-User angelegt werden.
Das steht im Log vom Proftpd: USER XY: no such user found from XXX.XXX.XXX.XXX
Hat wer einen Lösungsansatz?
Moin,
Ich hab das Problem das wohl keine Sub-FTP-User angelegt werden.
Das steht im Log vom Proftpd: USER XY: no such user found from XXX.XXX.XXX.XXX
Hat wer einen Lösungsansatz?
funktioniert leider nicht
hast du den die settings.ini in /etc/mysql die fehlte bei mir nämlich auch woran es auch scheitern könnte das war bei mir z.b der Fehler.
mysql hat mit proftpd rein gar nix am hit tekbase hat keinen proftpd mysql support
mysql hat mit proftpd rein gar nix am hit tekbase hat keinen proftpd mysql support
also ist es sinnlos hier das Thema anzusprechen?
Du subuser werden in der ftpd.passwd gespeichert
genau die ist aber leer. Dort wir nichts rein geschrieben welche Rechte sollte diese Datei haben?
genau die ist aber leer. Dort wir nichts rein geschrieben welche Rechte sollte diese Datei haben?
Siehe dem verlinkten post, da habe ich dies bereits geschrieben.
Bzw hier:
[Dateizugriff] Gameserver - keine Map auswählbar, keine Config usw. (Debian 8 - Froxlor - proftpd )
Da wird auch auf standalone oder xinet.d eingegangen wie die dateiberechtigungen sein müssen welchem user die files gehören müssen
habe ich gemacht geht trotzdem nicht
mysql hat mit proftpd rein gar nix am hit tekbase hat keinen proftpd mysql support
Komischer weiße ging es aber danach frag mich nicht warum hate den oben von mir verlinkten Post abgerarbeitet und kam bei dem selben Problem nicht weiter hatte dann an CF geschrieben und drum gebeten er möchte mir sagen woran es lag das bekam ich als Antwort zurück und nun geht es
ob er natürlich noch mehr gemacht hatt nur dieses in der Mail nicht erwähnt hatt weiß ich natürlich nicht
ah ok... Bei Uns läuft es net obwohl ich beide Beiträge beachtet und abgearbeitet habe... naja vlt finde ich nochmal ne Lösung
@GenXRoad stimmt ich war ein wenig ab vom pat bei mir lag noch ein anderes Problem vor bei dem MSyql bentötigt wurde das webModul lief nicht richtig dafür ist die Datei notwendig........
@Felix Borkenfeldich der is mal hart war davon ausgegangen das es danach bei mir gehen sollte habe es nun getestet und problem besteht bei mir auch weitherin nun kann ich auch weiter suchen
Es wäre halt interessant zu wissen ob standalone, xinet.d, plesk ja/nein?
jo standalone kein Plesk der root hatt Debian 8 und es wurde nur das Rootinstallscript installiert. Habe auch mal schnell noch dir prftp.conf hinzugefügt.
#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes, reload proftpd after modifications, if
# it runs in daemon mode. It is not required in inetd/xinetd mode.
#
# Includes DSO modules
Include /etc/proftpd/modules.conf
# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on
# If set on you can experience a longer connection delay in many cases.
ServerName "Debian"
ServerType standalone
DeferWelcome off
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"
DenyFilter \*.*/
# Use this to jail all users in their homes
# DefaultRoot ~
# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off
# Port 21 is the standard FTP port.
Port 21
# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534
# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4
# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Set the user and group that the server normally runs at.
User proftpd
Group nogroup
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off
# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c
# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off
TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log
# Logging onto /var/log/lastlog is enabled but set to off by default
#UseLastlog on
# In order to keep log file dates consistent after chroot, use timezone info
# from /etc/localtime. If this is not set, and proftpd is configured to
# chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight
# savings timezone regardless of whether DST is in effect.
#SetEnv TZ :/etc/localtime
<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>
<IfModule mod_ratio.c>
Ratios off
</IfModule>
# Delay engine reduces impact of the so-called Timing Attack described in
# http://www.securityfocus.com/bid/11430/discuss
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>
<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>
<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>
#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf
#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf
#
# Useful to keep VirtualHost/VirtualRoot directives separated
#
#Include /etc/proftpd/virtuals.conf
# A basic anonymous configuration, no upload directories.
# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>
# Include other custom configuration files
Include /etc/proftpd/conf.d/
AllowOverwrite on
UseReverseDNS off
IdentLookups off
DefaultRoot ~
RequireValidShell off
AuthOrder mod_auth_pam.c* mod_auth_unix.c mod_auth_file.c
AuthUserFile /etc/proftpd/ftpd.passwd
AuthGroupFile /etc/proftpd/ftpd.group
Es wäre halt interessant zu wissen ob standalone, xinet.d, plesk ja/nein?
Kein Plesk
Standalone
Ubuntu 14.04
#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes, reload proftpd after modifications, if
# it runs in daemon mode. It is not required in inetd/xinetd mode.
#
# Includes DSO modules
Include /etc/proftpd/modules.conf
# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on
# If set on you can experience a longer connection delay in many cases.
ServerName "Debian"
ServerType standalone
DeferWelcome off
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"
DenyFilter \*.*/
# Use this to jail all users in their homes
# DefaultRoot ~
# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off
# Port 21 is the standard FTP port.
Port 21
# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534
# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4
# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Set the user and group that the server normally runs at.
User proftpd
Group nogroup
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off
# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c
# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off
TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log
# Logging onto /var/log/lastlog is enabled but set to off by default
#UseLastlog on
# In order to keep log file dates consistent after chroot, use timezone info
# from /etc/localtime. If this is not set, and proftpd is configured to
# chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight
# savings timezone regardless of whether DST is in effect.
#SetEnv TZ :/etc/localtime
<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>
<IfModule mod_ratio.c>
Ratios off
</IfModule>
# Delay engine reduces impact of the so-called Timing Attack described in
# http://www.securityfocus.com/bid/11430/discuss
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>
<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>
<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>
#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf
#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf
#
# Useful to keep VirtualHost/VirtualRoot directives separated
#
#Include /etc/proftpd/virtuals.conf
# A basic anonymous configuration, no upload directories.
# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>
# Include other custom configuration files
Include /etc/proftpd/conf.d/
AllowOverwrite on
UseReverseDNS off
IdentLookups off
DefaultRoot ~
RequireValidShell off
AuthOrder mod_auth_pam.c* mod_auth_unix.c mod_auth_file.c
AuthUserFile /etc/proftpd/ftpd.passwd
AuthGroupFile /etc/proftpd/ftpd.group
Alles anzeigen
Was sagt die proftpd.log?
Was sagt die proftpd.log?
2017-05-25 23:02:01,802 pg-mg.de proftpd[18978] 127.0.0.1: ProFTPD 1.3.5rc3 (devel) (built Fri Feb 17 2017 19:15:12 UTC) standalone mode STARTUP
2017-05-25 23:09:44,343 pg-mg.de proftpd[18978] 127.0.0.1: ProFTPD killed (signal 15)
2017-05-25 23:09:44,343 pg-mg.de proftpd[18978] 127.0.0.1: ProFTPD 1.3.5rc3 standalone mode SHUTDOWN
2017-05-25 23:09:44,368 pg-mg.de proftpd[19073] 127.0.0.1: ProFTPD 1.3.5rc3 (devel) (built Fri Feb 17 2017 19:15:12 UTC) standalone mode STARTUP
2017-05-25 23:17:29,086 pg-mg.de proftpd[19159] 127.0.0.1 (IP[IP]): FTP session opened.
2017-05-25 23:17:29,191 pg-mg.de proftpd[19159] 127.0.0.1 (IP[IP]): USER test: no such user found from IP [IP] to ::ffff:IP:21
2017-05-25 23:17:29,239 pg-mg.de proftpd[19159] 127.0.0.1 (IP[IP]): FTP session closed.
2017-05-26 00:02:58,089 pg-mg.de proftpd[19398] 127.0.0.1 (IP[IP]): FTP session opened.
2017-05-26 00:02:58,428 pg-mg.de proftpd[19398] 127.0.0.1 (IP[IP]): FTP session closed.
Okay, also musst du chomd 0440 und proftpd:root verwenden, dann söllte es gehen, wenn du im teklab members.php einen subuser erstellst bzw. Hast du expect installiert?
Gleichen log habe ich auch chmod der datei ftpd.passwd ist auf 0440 exact so wie es sein soll .
expect wird das nicht mit den rootinstalscript mit installiert ?