Ich habe über eine Konversation die daten geschickt.
Beiträge von DerpyEnte
Aktuell führen wir noch einige Anpassungen durch, das Forum wurde jedoch bereits live geschaltet.
-
-
jetzt meckert proftpd wegen den Directory Einstellungen in der proftpd.conf rum. und zwar irgendwie wegen dem ~ bei <Directory ~>
CodeJan 12 15:16:57 static systemd[1]: Starting LSB: Starts ProFTPD daemon... Jan 12 15:16:57 static proftpd[3636]: * Starting ftp server proftpd Jan 12 15:16:57 static proftpd[3636]: 2020-01-12 15:16:57,145 static proftpd[3657]: fatal: <Directory>: <Directory> section already configured for '~' on line 188 of '/etc/proftpd/proftpd.conf' Jan 12 15:16:57 static proftpd[3636]: ...fail! Jan 12 15:16:57 static systemd[1]: proftpd.service: Control process exited, code=exited status=1 Jan 12 15:16:57 static systemd[1]: proftpd.service: Failed with result 'exit-code'. Jan 12 15:16:57 static systemd[1]: Failed to start LSB: Starts ProFTPD daemon.
-
Der FTP Login funktioniert immer noch nicht. jetzt habe ich aber herausgefunden, dass irgendwie etwas fehlt, da die tekbase Konsole das hier ausgespuckt hat:
-
ich habe jetzt mal vsftpd installiert und nun zeigt er auch nicht mehr an, dass keine Verbindung mehr hergestellt werden kann, aber der FTP Login Falsch sei.
-
ich habe gerade in den teklab_status geschaut und bemerkt dass vsftpd als error makiert wurde. vsftpd war aber auch nicht installiert, nur ich weiß nicht ob das was bringt wenn ich das installiere.
-
xinetd habe ich sowieso nicht, da ich kein plesk auf meinen Server installiert habe.
Funktionieren tut es aber immer noch nicht.
Muss ich denn, wenn ich User und Server bereits vor der Behebung des fehlers irgendwie die benutzer neu erstellen oder so? oder übernimmt das Skript das automatisch?
-
Also ich habe jetzt mod_Auth_file.c auch raus gelöscht und neugestartet, aber im interface wird immernoch Verbindung zum FTP nicht möglich angezeigt.
Hier einmal meine ProFTPd:
Apache Configuration
Alles anzeigen# # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file. # To really apply changes, reload proftpd after modifications, if # it runs in daemon mode. It is not required in inetd/xinetd mode. # # Includes DSO modules Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6 off # If set on you can experience a longer connection delay in many cases. ServerName "Debian" # Set to inetd only if you would run proftpd by inetd/xinetd. # Read README.Debian for more information on proper configuration. ServerType standalone DeferWelcome off MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ # Use this to jail all users in their homes # Users require a valid shell listed in /etc/shells to login. # Use this directive to release that constrain. # Port 21 is the standard FTP port. Port 21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. # PassivePorts 49152 65534 # If your host was NATted, this option is useful in order to # allow passive tranfers to work. You have to use your public # address and opening the passive ports used on your firewall as well. # MasqueradeAddress 1.2.3.4 # This is useful for masquerading address with dynamic IPs: # refresh any configured MasqueradeAddress directives every 8 hours <IfModule mod_dynmasq.c> # DynMasqRefresh 28800 </IfModule> # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. User proftpd Group nogroup # Umask 077 077 # (second parm) from being group and world writable. Umask 077 077 # Normally, we want files to be overwriteable. # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: # PersistentPasswd off # This is required to use both PAM-based authentication and local passwords # AuthOrder mod_auth_pam.c* mod_auth_unix.c # Be warned: use of this directive impacts CPU average load! # Uncomment this if you like to see progress and transfer rate with ftpwho # in downloads. That is not needed for uploads rates. # # UseSendFile off TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log # Logging onto /var/log/lastlog is enabled but set to off by default #UseLastlog on # In order to keep log file dates consistent after chroot, use timezone info # from /etc/localtime. If this is not set, and proftpd is configured to # chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight # savings timezone regardless of whether DST is in effect. #SetEnv TZ :/etc/localtime <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> # Delay engine reduces impact of the so-called Timing Attack described in # http://www.securityfocus.com/bid/11430/discuss # It is on by default. <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # Alternative authentication frameworks # #Include /etc/proftpd/ldap.conf #Include /etc/proftpd/sql.conf # # This is used for FTPS connections # #Include /etc/proftpd/tls.conf # # Useful to keep VirtualHost/VirtualRoot directives separated # #Include /etc/proftpd/virtuals.conf # A basic anonymous configuration, no upload directories. # <Anonymous ~ftp> # User ftp # Group nogroup # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # Cosmetic changes, all files belongs to ftp user # DirFakeUser on ftp # DirFakeGroup on ftp # # RequireValidShell off # # # Limit the maximum number of anonymous logins # MaxClients 10 # # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin welcome.msg # DisplayChdir .message # # # Limit WRITE everywhere in the anonymous chroot # <Directory *> # <Limit WRITE> # DenyAll # </Limit> # </Directory> # # # Uncomment this if you're brave. # # <Directory incoming> # # # Umask 077 077 # # # (second parm) from being group and world writable. # # Umask 077 077 # # <Limit READ WRITE> # # DenyAll # # </Limit> # # <Limit STOR> # # AllowAll # # </Limit> # # </Directory> # # </Anonymous> # Include other custom configuration files Include /etc/proftpd/conf.d/ <Directory ~> HideFiles (^\..+|\.ssh|\.bash_history|\.bash_logout|\.bashrc|\.profile|srcds_run|srcds_linux|hlds_run|hlds_amd|hlds_i686|\.rc|\.sh|\.7z|\.dll)$ PathDenyFilter (^\..+|\.ssh|\.bash_history|\.bash_logout|\.bashrc|\.profile|srcds_run|srcds_linux|hlds_run|hlds_amd|hlds_i686|\.rc|\.sh|\.7z|\.dll)$ HideNoAccess on <Limit CHMOD SITE_CHMOD> DenyAll </Limit> </Directory> <Directory /home/*/*> Umask 077 077 </Directory> <Directory /home/user-webi/*> Umask 077 077 <Limit RNFR RNTO STOR DELE MKD RMD> DenyAll </Limit> </Directory> <Directory /home/skripte/*> Umask 077 077 <Limit RNFR RNTO STOR DELE MKD RMD> DenyAll </Limit> </Directory> <Directory ~> HideFiles (^\..+|\.ssh|\.bash_history|\.bash_logout|\.bashrc|\.profile|srcds_run|srcds_linux|hlds_run|hlds_amd|hlds_i686|\.rc|\.sh|\.7z|\.dll)$ PathDenyFilter (^\..+|\.ssh|\.bash_history|\.bash_logout|\.bashrc|\.profile|srcds_run|srcds_linux|hlds_run|hlds_amd|hlds_i686|\.rc|\.sh|\.7z|\.dll)$ HideNoAccess on <Limit CHMOD SITE_CHMOD> DenyAll </Limit> </Directory> <Directory /home/*/*> Umask 077 077 </Directory> <Directory /home/user-webi/*> Umask 077 077 <Limit RNFR RNTO STOR DELE MKD RMD> DenyAll </Limit> </Directory> <Directory /home/skripte/*> Umask 077 077 <Limit RNFR RNTO STOR DELE MKD RMD> DenyAll </Limit> </Directory> AllowOverwrite on UseReverseDNS off IdentLookups off DefaultRoot ~ RequireValidShell off AuthOrder mod_auth_pam.c* mod_auth_unix.c #AuthUserFile /etc//ftpd.passwd #AuthGroupFile /etc//ftpd.group
-
Hi, danke für die Hilfe.
ich hab beide Varianten ausprobiert und es hat leider nicht geklappt. Werden die benutzer denn eigentlich trotz der Änderung in proftpd importier?
-
Hallo Alle zusammen,
Ich habe per Setup tool einen root Server auf unserem hostserver erstellt und erfolgreich im webinterface von teklab eingebunden. Nun habe ich aber das Problem, dass keine Verbindung per FTP zum Server möglich ist. Starten/stoppen oder Restarten, sowie Einstellungen und die Konsole funktionieren, nur das webftp und die zugangsdaten zu ftp halt nicht.
Wenn jemand helfen kann währe das sehr nett.
Mit Freundlichen Grüßen,
DerpyEnte - GamesRapid
-
Hi BluePoisen,
Der License Error ist normal und kommt bei jeder ersten installation, da die Lizenz von teklab erst erstellt und freigegeben werden muss.
einfach eine email an service@teklab.de senden, dort den Link hinterher senden zur admin.php und deine lizenz wird idr. innerhalb 1-2 Tage freigeschaltet.
Gruß,
DerpyEnte