vielleicht findet sich ja noch ne Lösung. Man soll ja immer positiv denken.
Beiträge von CraZyFl3X|Felix
Aktuell führen wir noch einige Anpassungen durch, das Forum wurde jedoch bereits live geschaltet.
-
-
Jetzt kommt ja nur noch Password falsch. Und kein anderer Fehler mehr...
Bei Dir auch?
Schon komisch -
bringt nix wieder steht im log falsches passwort...
-
ja mit gleichen rechten. Wovor ein # in der Config
-
Gruppe: root
Eigentümer: proftpdRechte: 0440
-
Von welchen Dateien?
-
Klappt auch nicht mit Buchstaben und Zahlen.
Der Eintrag ist vorhanden: AuthOrder mod_auth_pam.c* mod_auth_unix.c mod_auth_file.c
-
Also FTP geht nun?
Mit Streamservern kenne ich mich leider nicht so aus...
-
Okay, also musst du chomd 0440 und proftpd:root verwenden, dann söllte es gehen, wenn du im teklab members.php einen subuser erstellst bzw. Hast du expect installiert?
Code2017-05-26 12:25:29,422 pg-mg.de proftpd[23672] 127.0.0.1 (IP[IP]): FTP session opened. 2017-05-26 12:25:32,148 pg-mg.de proftpd[23672] 127.0.0.1 (IP[IP]): USER test (Login failed): Incorrect password. 2017-05-26 12:25:32,193 pg-mg.de proftpd[23672] 127.0.0.1 (IP[IP]): FTP session closed.
Also nun werden User in die Datei geschrieben aber die Anmeldung funktioniert nicht. Muss das Password bestimmte Zeicehn entsprechen?
-
Was sagt die proftpd.log?
Code2017-05-25 23:02:01,802 pg-mg.de proftpd[18978] 127.0.0.1: ProFTPD 1.3.5rc3 (devel) (built Fri Feb 17 2017 19:15:12 UTC) standalone mode STARTUP 2017-05-25 23:09:44,343 pg-mg.de proftpd[18978] 127.0.0.1: ProFTPD killed (signal 15) 2017-05-25 23:09:44,343 pg-mg.de proftpd[18978] 127.0.0.1: ProFTPD 1.3.5rc3 standalone mode SHUTDOWN 2017-05-25 23:09:44,368 pg-mg.de proftpd[19073] 127.0.0.1: ProFTPD 1.3.5rc3 (devel) (built Fri Feb 17 2017 19:15:12 UTC) standalone mode STARTUP 2017-05-25 23:17:29,086 pg-mg.de proftpd[19159] 127.0.0.1 (IP[IP]): FTP session opened. 2017-05-25 23:17:29,191 pg-mg.de proftpd[19159] 127.0.0.1 (IP[IP]): USER test: no such user found from IP [IP] to ::ffff:IP:21 2017-05-25 23:17:29,239 pg-mg.de proftpd[19159] 127.0.0.1 (IP[IP]): FTP session closed. 2017-05-26 00:02:58,089 pg-mg.de proftpd[19398] 127.0.0.1 (IP[IP]): FTP session opened. 2017-05-26 00:02:58,428 pg-mg.de proftpd[19398] 127.0.0.1 (IP[IP]): FTP session closed.
-
Es wäre halt interessant zu wissen ob standalone, xinet.d, plesk ja/nein?
Kein Plesk
Standalone
Ubuntu 14.04Apache Configuration: Meine proftpd.conf
Alles anzeigen# # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file. # To really apply changes, reload proftpd after modifications, if # it runs in daemon mode. It is not required in inetd/xinetd mode. # # Includes DSO modules Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6 on # If set on you can experience a longer connection delay in many cases. ServerName "Debian" ServerType standalone DeferWelcome off MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ # Use this to jail all users in their homes # DefaultRoot ~ # Users require a valid shell listed in /etc/shells to login. # Use this directive to release that constrain. # RequireValidShell off # Port 21 is the standard FTP port. Port 21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. # PassivePorts 49152 65534 # If your host was NATted, this option is useful in order to # allow passive tranfers to work. You have to use your public # address and opening the passive ports used on your firewall as well. # MasqueradeAddress 1.2.3.4 # This is useful for masquerading address with dynamic IPs: # refresh any configured MasqueradeAddress directives every 8 hours <IfModule mod_dynmasq.c> # DynMasqRefresh 28800 </IfModule> # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. User proftpd Group nogroup # Umask 022 is a good standard umask to prevent new files and dirs # (second parm) from being group and world writable. Umask 022 022 # Normally, we want files to be overwriteable. # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: # PersistentPasswd off # This is required to use both PAM-based authentication and local passwords # AuthOrder mod_auth_pam.c* mod_auth_unix.c # Be warned: use of this directive impacts CPU average load! # Uncomment this if you like to see progress and transfer rate with ftpwho # in downloads. That is not needed for uploads rates. # # UseSendFile off TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log # Logging onto /var/log/lastlog is enabled but set to off by default #UseLastlog on # In order to keep log file dates consistent after chroot, use timezone info # from /etc/localtime. If this is not set, and proftpd is configured to # chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight # savings timezone regardless of whether DST is in effect. #SetEnv TZ :/etc/localtime <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> # Delay engine reduces impact of the so-called Timing Attack described in # http://www.securityfocus.com/bid/11430/discuss # It is on by default. <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # Alternative authentication frameworks # #Include /etc/proftpd/ldap.conf #Include /etc/proftpd/sql.conf # # This is used for FTPS connections # #Include /etc/proftpd/tls.conf # # Useful to keep VirtualHost/VirtualRoot directives separated # #Include /etc/proftpd/virtuals.conf # A basic anonymous configuration, no upload directories. # <Anonymous ~ftp> # User ftp # Group nogroup # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # Cosmetic changes, all files belongs to ftp user # DirFakeUser on ftp # DirFakeGroup on ftp # # RequireValidShell off # # # Limit the maximum number of anonymous logins # MaxClients 10 # # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin welcome.msg # DisplayChdir .message # # # Limit WRITE everywhere in the anonymous chroot # <Directory *> # <Limit WRITE> # DenyAll # </Limit> # </Directory> # # # Uncomment this if you're brave. # # <Directory incoming> # # # Umask 022 is a good standard umask to prevent new files and dirs # # # (second parm) from being group and world writable. # # Umask 022 022 # # <Limit READ WRITE> # # DenyAll # # </Limit> # # <Limit STOR> # # AllowAll # # </Limit> # # </Directory> # # </Anonymous> # Include other custom configuration files Include /etc/proftpd/conf.d/ AllowOverwrite on UseReverseDNS off IdentLookups off DefaultRoot ~ RequireValidShell off AuthOrder mod_auth_pam.c* mod_auth_unix.c mod_auth_file.c AuthUserFile /etc/proftpd/ftpd.passwd AuthGroupFile /etc/proftpd/ftpd.group
-
ah ok... Bei Uns läuft es net obwohl ich beide Beiträge beachtet und abgearbeitet habe... naja vlt finde ich nochmal ne Lösung
-
habe ich gemacht geht trotzdem nicht
-
genau die ist aber leer. Dort wir nichts rein geschrieben welche Rechte sollte diese Datei haben?
-
Tekbase installiert proFTPd mit.
Wurde ein FTP Server im Admin WI unter Einstellungen eingerichtet? Die Anmelde Daten stehen in einer TxT im /home -
mysql hat mit proftpd rein gar nix am hit tekbase hat keinen proftpd mysql support
also ist es sinnlos hier das Thema anzusprechen?
-
funktioniert leider nicht
-
Moin,
Ich hab das Problem das wohl keine Sub-FTP-User angelegt werden.
Das steht im Log vom Proftpd: USER XY: no such user found from XXX.XXX.XXX.XXX
Hat wer einen Lösungsansatz?
-
Also nachdem 'ITHosting Kraft' mir geholfen hat wurde es schon mal untereinander angezeigt. Doch die Auflistungs Punkte wurden nicht angezeigt,dies habe ich aufgrund von viel Stress gar nicht erst wahrgenommen. Nachdem ich nochmal mit 'ITHosting Kraft' geschrieben habe und er mir kurz zeigte was ich wie "verknüpfen" soll da die Auflistungs Punkte durch einen anderen Punkt wieder entfernt werden und zwar global habe ich folgenden Code erstellt:
CSS.auflistung ul li { float: none !important; list-style-type: square !important; list-style-position: outside !important; list-style-image: none !important; }
Durch diese Änderung geht es nun endlich und ich weis in Zukunft sofort was ich wie verändern muss. Ich muss auch leider zugeben das ich Jahrelang nur Wordpress und Joomla kannte,dort aber mir die Erlaubnis zum Umbau sämtlicher Sachen fehlte und auch viele Plugins nicht mehr geupdatet wurden habe ich diese CMS aufgegeben. Doch nun kann ich ja alles selber anpassen etc. Nachdem man einmal weiß wie es geht sollte es denke ich mal auch kein Problem mehr bei mir darstellen.
Overall_header nach <ul> suchen und ul class="menubar" geben dann das ul li mit float left in ul.menubar li ändernDies werde ich auch sobald ich ein bisschen mehr Zeit habe in Angriff nehmen
Trotzdem Vielen Dank an allen die mir geholfen haben. Hat man Probleme ist das hier die richtige Adresse!
-
Werde gleich nochmal hier zu was posten. Da ich erst jetzt Wochenende habe kann ich erst jetzt wieder was schreiben...