Shoutcast Server startet nicht

16.03.2020: Due to the current events regarding the Cornavirus Pandemic, teklab.de offers a 30% discount with the discount code "STAYATHOME" until further notice. Insert this code at the end of the order.
  • Hallo liebe Community,

    ich habe auf einem Debian 14 Server per autoinstaller Tekbase installieren. Er hat alles automatisch gemacht inkl. PHP, MYSQL und Phpmyadmin. (alle daten selber hinzugefügt)

    In den Einstellungen habe ich meine FTP Daten eingegeben. Als ich einen Shoutcast Server erstellen wollte startet er nicht - er bleibt ROT.

    Dazu kann ich auch keine sc_trans oder sc_serv config bearbeiten. (Fehler: Der FTP Server ist nicht verfügbar bzw. offline! <a>- Zurück)</a> Ich habe schon alles mögliche durchgelesen. Es funktioniert nichts - teilweise gehen die befehle auch nie.

    ProFTPD Status.. :angry:

    <p class="">â— proftpd.service - LSB: Starts ProFTPD daemon
    <p class=""> Loaded: loaded (/etc/init.d/proftpd)
    <p class=""> Active: failed (Result: exit-code) since Fri 2016-04-01 14:47:05 EDT; 30min ago
    <p class=""> Process: 513 ExecStart=/etc/init.d/proftpd start (code=exited, status=1/FAILURE)
    <p class="">
    <p class="">Apr 01 14:47:05 debian512-1station proftpd[513]: Starting ftp server: proftp...y
    <p class="">Apr 01 14:47:05 debian512-1station proftpd[513]: 2016-04-01 14:47:05,147 deb...'
    <p class="">Apr 01 14:47:05 debian512-1station proftpd[513]: failed!
    <p class="">Apr 01 14:47:05 debian512-1station systemd[1]: proftpd.service: control proc...1
    <p class="">Apr 01 14:47:05 debian512-1station systemd[1]: Failed to start LSB: Starts P....
    <p class="">Apr 01 14:47:05 debian512-1station systemd[1]: Unit proftpd.service entered ....
    <p class="">Hint: Some lines were ellipsized, use -l to show in full.
    <p class="">[1]+ Exit 127 ./tekbase_daemon


    Kann mir jemand helfen bevor ich verzweifel? :lol:

    Liebe Grüße
    pixzon

  • Code


    Nein, ich habe es auf einem normalen Debian Server installiert. Sollte ich nochmal alles neu machen und lieber eine andere Debian Version nehmen?

    Hier ist eine config datei.

    #
    # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
    # To really apply changes, reload proftpd after modifications, if
    # it runs in daemon mode. It is not required in inetd/xinetd mode.
    #

    # Includes DSO modules
    Include /etc/proftpd/modules.conf

    # Set off to disable IPv6 support which is annoying on IPv4 only boxes.
    # If set on you can experience a longer connection delay in many cases.

    ServerName "Debian"
    ServerType standalone
    DeferWelcome off

    MultilineRFC2228 on
    DefaultServer on
    ShowSymlinks on

    TimeoutNoTransfer 600
    TimeoutStalled 600
    TimeoutIdle 1200

    DisplayLogin welcome.msg
    DisplayChdir .message true
    ListOptions "-l"

    DenyFilter \*.*/

    # Use this to jail all users in their homes
    # DefaultRoot ~

    # Users require a valid shell listed in /etc/shells to login.
    # Use this directive to release that constrain.
    # RequireValidShell off

    # Port 21 is the standard FTP port.
    Port 21

    # In some cases you have to specify passive ports range to by-pass
    # firewall limitations. Ephemeral ports can be used for that, but
    # feel free to use a more narrow range.
    # PassivePorts 49152 65534

    # If your host was NATted, this option is useful in order to
    # allow passive tranfers to work. You have to use your public
    # address and opening the passive ports used on your firewall as well.
    # MasqueradeAddress 1.2.3.4

    # This is useful for masquerading address with dynamic IPs:
    # refresh any configured MasqueradeAddress directives every 8 hours
    <IfModule mod_dynmasq.c>
    # DynMasqRefresh 28800
    </IfModule>

    # To prevent DoS attacks, set the maximum number of child processes
    # to 30. If you need to allow more than 30 concurrent connections
    # at once, simply increase this value. Note that this ONLY works
    # in standalone mode, in inetd mode you should use an inetd server
    # that allows you to limit maximum number of processes per service
    # (such as xinetd)
    MaxInstances 30

    # Set the user and group that the server normally runs at.
    User proftpd
    Group nogroup

    # Umask 022 is a good standard umask to prevent new files and dirs
    # (second parm) from being group and world writable.
    Umask 022 022
    # Normally, we want files to be overwriteable.

    # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
    # PersistentPasswd off

    # This is required to use both PAM-based authentication and local passwords
    # AuthOrder mod_auth_pam.c* mod_auth_unix.c

    # Be warned: use of this directive impacts CPU average load!
    # Uncomment this if you like to see progress and transfer rate with ftpwho
    # in downloads. That is not needed for uploads rates.
    #
    # UseSendFile off

    TransferLog /var/log/proftpd/xferlog
    SystemLog /var/log/proftpd/proftpd.log

    # Logging onto /var/log/lastlog is enabled but set to off by default
    #UseLastlog on

    # In order to keep log file dates consistent after chroot, use timezone info
    # from /etc/localtime. If this is not set, and proftpd is configured to
    # chroot (e.g. DefaultRoot or http://www.securityfocus.com/bid/11430/discuss
    # It is on by default.
    <IfModule mod_delay.c>
    DelayEngine on
    </IfModule>

    <IfModule mod_ctrls.c>
    ControlsEngine off
    ControlsMaxClients 2
    ControlsLog /var/log/proftpd/controls.log
    ControlsInterval 5
    ControlsSocket /var/run/proftpd/proftpd.sock
    </IfModule>

    <IfModule mod_ctrls_admin.c>
    AdminControlsEngine off
    </IfModule>

    #
    # Alternative authentication frameworks
    #
    #Include /etc/proftpd/ldap.conf
    #Include /etc/proftpd/sql.conf

    #
    # This is used for FTPS connections
    #
    #Include /etc/proftpd/tls.conf

    #
    # Useful to keep VirtualHost/VirtualRoot directives separated
    #
    #Include /etc/proftpd/virtuals.conf

    # A basic anonymous configuration, no upload directories.

    # <Anonymous ~ftp>
    # User ftp
    # Group nogroup
    # # We want clients to be able to login with "anonymous" as well as "ftp"
    # UserAlias anonymous ftp
    # # Cosmetic changes, all files belongs to ftp user
    # DirFakeUser on ftp
    # DirFakeGroup on ftp
    #
    # RequireValidShell off
    #
    # # Limit the maximum number of anonymous logins
    # MaxClients 10
    #
    # # We want 'welcome.msg' displayed at login, and '.message' displayed
    # # in each newly chdired directory.
    # DisplayLogin welcome.msg
    # DisplayChdir .message
    #
    # # Limit WRITE everywhere in the anonymous chroot
    # <Directory *>
    # <Limit WRITE>
    # DenyAll
    # </Limit>
    # </Directory>
    #
    # # Uncomment this if you're brave.
    # # <Directory incoming>
    # # # Umask 022 is a good standard umask to prevent new files and dirs
    # # # (second parm) from being group and world writable.
    # # Umask 022 022
    # # <Limit READ WRITE>
    # # DenyAll
    # # </Limit>
    # # <Limit STOR>
    # # AllowAll
    # # </Limit>
    # # </Directory>
    #
    # </Anonymous>

    # Include other custom configuration files
    Include /etc/proftpd/conf.d/
    RequireValidShell off
    AuthUserFile /etc/proftpd/ftpd.passwd
    AllowOverwrite on
    UseIPv6 off
    UseFTPUsers off
    UseReverseDNS off
    IdentLookups off
    DefaultRoot ~

  • Jetzt ist mein Problem - das der AutoDJ nicht startet, da ein Spiel wo der Stream eingefügt wird, nur mp3 empfangen kann. Kann es also von accp auf MP3 umgestellt. Dann kommt dies... :o

    2016-04-04 18:38:28 E msg:[SOURCEANDENDPOINTMANAGER] Unknown encoder type mp3. Ensure you have entered the license key and name fully.
    2016-04-04 18:38:29 I msg:<***> Logger shutdown

  • Das ist "lizenzsharing" was da betrieben wird, und nicht wirklich legal würde ich mal sagen...

    Die Lizenz von AOL/ShoutCast gibt es nicht mehr zu kaufen...

    Zumal für das "Lizenzsharing" mal ordentlichst was drauf gelegt werden muss...

  • Muss jeder selbst wissen ;)



    AOL verkauft keine Keys mehr alles andere ist nunja mehr oder minder nicht legal ;)



    Soweit ich informiert bin bekommt da jeder den gleichen key

  • Wenn ich Shoutcast 1 nutze, kann ich dann trotzdem den Transcoder 2 nehmen um den Key zu umgehen?

  • Hat jemand ich ein 64 Bit mit dem Transcoder 2 und eingebauter calendar funktion? Ich bin so viel am besten, nie funktioniert es.